Table of Contents
Advertisement
Safety notes
2.2 Installation in hazardous locations
Atmosphère explosible
ATEX
94/9/EC
Pressure equipment directi-
ve PED
97/23/EC
The applicable directives can be found in the EC conformity declaration of the specific
device. Further country or region-specific code conformity information is available on
request.
Improper device modifications
Danger to personnel, system and environment can result from modifications to the device,
particularly in hazardous areas.
• Only carry out modifications that are described in the instructions for the device. Failure
Note
CE declaration
The CE declaration certificate is available on the SensorFlash SD card delivered with the
device.
Note
EAC declaration
The EAC declaration is available on the SensorFlash SD card delivered with the device.
2.2
Installation in hazardous locations
Equipment used in hazardous locations
Equipment used in hazardous locations must be Ex-approved for the region of installation
and marked accordingly. It is required that the special conditions for safe use provided in
the manual and in the Ex certificate are followed!
16
WARNING
to observe this requirement cancels the manufacturer's warranty and the product
approvals.
WARNING
Directive of the European Parliament and the Council on the
approximation of the laws of the Member States concerning
equipment and protective systems intended for use in potential-
ly explosive atmospheres.
Directive of the European Parliament and of the Council on the
approximation of the laws of the Member States concerning
pressure equipment.
Operating Instructions, 02/2016, A5E33120874-AC
FC410 with Modbus
Advertisement
Table of Contents
