Siemens SITRANS F Programming Manual page 21

1. At the Si-Ware menu bar, click the left mouse on [Graphs]. The drop down menu with
2. Position the cursor over [Signal Graph] and click the left mouse button. The Signal Graph
3. Using the mouse, select the desired channel and type of signal to graph. The menu
Si-Ware Quick Start
Programming Manual, 10/2011, A5E02951525-03
[Signal Graph] and [Trend Graph] will open.
screen will appear and begin gathering data automatically. Any active flowmeter channels
will be shown as available for selection with bold font. Inactive channels will be grayed
out to prevent selection.
selection choices are defined in the table below:
Menu Screens
4.3 Graphs Menu
19