Safety
2.4 Necessary qualifications
The installation and adjustments described below may only be carried out by qualified personnel.
3 Safety
3.1 Explanation of Warning Symbols
Warnings regarding possible risks of severe accident or injury.
WARNING
Warnings regarding possible risks of accident or injury.
CAUTION
Warnings regarding possible technical damage.
NOTICE
3.2 General safety instructions
WARNING
Lack of instruction
Risk of falling, tipping over due to lack of knowledge
► Instruct the user or the attendant in the proper use of the product when handing it over.
CAUTION
Use of unsuitable tools
Pinching, crushing or damaging the product
► When working, use only tools that are suitable for the conditions at the workplace and whose proper use
ensures safety and health protection.
NOTICE
Tipping or falling of the product
Damage to the product
► When you work on the product, secure it so that it cannot tip over or fall over.
► Use a clamping device to secure the product for all work at a workbench.
NOTICE
Use of unsuitable packaging
Damage caused by transport in the wrong packaging
► Use only the original packaging for delivery of the product.
3.3 Safety instructions for assembly
CAUTION
Incorrect fitting of the rear wheels
Risk of falling or tipping due to wheels coming loose
► After every assembly, check the proper mounting of the rear wheels. The wheel axles must be securely locked
in the fitting.
CAUTION
Modified diameters/mounting positions of the wheels
Risk of falling of tipping of the user due to locking wheels
► Modification of the size and position of the front wheels and of the rear wheel size can lead to wobbling of the
front wheels at higher speeds. If modification is necessary, ensure proper horizontal alignment of the wheel
chair frame (see chapter "Adjustment of the rear wheel", "Adjustment of the front wheel").
6 | Ottobock
Ventus