Adjustments
32
Special requirements for adjustments (all types of wheel locks)
Depending on the adjustment, it may be necessary to rotate or replace the support for the wheel lock. This makes
further wheel lock adjustments possible.
1) Loosen the Allen head screws between the wheel lock and the support (example: scissor wheel lock: see
fig. 34, item 1; see fig. 35, item 1).
2) Rotate and reposition the support as necessary (example: scissor wheel lock: see fig. 34, item 2; see fig. 35,
item 2).
3) Retighten the Allen head screws between the wheel lock (with spacer in some cases) and the support.
34
Special requirements for adjustments to the scissor wheel locks
•
Install the scissor wheel lock such that it can be guaranteed that the swivelling parts can move freely without
colliding (see fig. 36 item 1; see fig. 37, item 1).
•
The scissor wheel lock should not hit the frame when it is open.
•
For information on using the scissor wheel lock, see the instructions for use (user), reference number
647G828.
36
20 | Ottobock
33
35
37
Ventus