Setting Volume And Sound - Siemens SIMATIC HMI KP400 Comfort Operating Instructions Manual

Commissioning the device
4.3 Parameter assignment for Comfort Panel
4.3.6.11

Setting volume and sound

Volume and sound of 4" devices
You can activate an acoustic feedback for keyboard and touch screen operations. A sound is
emitted with each touch or activation of a key.
Requirement
The Control Panel is open.
Note
If you disable each of the settings under "Enable clicks and taps for", no acoustic signals will
be output for incorrect operator inputs.
Procedure
Proceed as follows:
1. Open the "Sound" dialog using the "Sound" icon.
2. To output acoustic signals for operator actions, select the desired options under "Enable
clicks and taps for":
– "Key clicks": Feedback of key operation
– "Screen taps": Feedback of touch operation
3. Use "Loud" and "Soft" to select between loud and quiet operator feedback.
4. Confirm your entries with "OK".
The properties of acoustic signals are set.
106
Operating Instructions, 07/2017, A5E36770603-AB
Comfort Panels