Siemens SIMATIC HMI KP400 Comfort Operating Instructions Manual page 4

Preface
NOTICE
Manual is part of the HMI device
This manual is part of the HMI device and is also required for repeat commissioning. Keep
all supplied and supplementary documentation for the entire service life of the HMI device.
Provide all stored documents to subsequent owners of the HMI device.
Trademarks
The following designations marked with the symbol ® are registered trademarks of
Siemens AG:
● HMI
● SIMATIC
● WinCC
Style conventions
Style Convention
"Add screen"
"File > Edit"
<F1>, <Alt+P>
Please observe notes labeled as follows:
Note
A note contains important information about the product described in the manual and its use,
or a specific section of the manual to which you should pay particular attention.
4
®
®
®
Scope
•
•
•
Operational sequences, for example, menu commands, shortcut
menu commands.
Keyboard operation
Terminology that appears in the user interface, for example, dia-
log names, tabs, buttons, menu commands
Required input, for example, limits, tag values.
Path information
Operating Instructions, 07/2017, A5E36770603-AB
Comfort Panels