Configuring E-Mail - Siemens SIMATIC HMI KP400 Comfort Operating Instructions Manual

Commissioning the device
4.3 Parameter assignment for Comfort Panel
4. Enter the name of your assigned domain in the "Domain" text box.
5. Confirm your entries with "OK".
The dialog closes.
The logon data has now been set.
4.3.10.6

Configuring e-mail

You use this function to set the SMTP server, sender name and e-mail account for e-mail
service.
Requirement
● The Control Panel is open.
● Your system administrator has provided you with the necessary information.
Note
Additional tabs may appear in the "WinCC Internet Settings" dialog. This depends on the
options that have been enabled for operating the local network in the project.
Procedure
1. Open the "WinCC Internet Settings" dialog using the "WinCC Internet Settings" icon.
2. Change to the "Email" tab.
①
②
③
3. Specify the SMTP server.
– Select the "Use the default of ..." option if you want to use the SMTP server
– Clear the "Use the default of ..." option if you do not want to use the SMTP server
126
Setting of the SMTP server
Name of the sender and e-mail account
"Advanced" button for additional settings
configured in the project.
configured in the project. Enter the required SMTP server and the corresponding port.
Operating Instructions, 07/2017, A5E36770603-AB
Comfort Panels