Mechanical Ambient Conditions; Storage Conditions; Operating Conditions - Siemens SIMATIC HMI KP400 Comfort Operating Instructions Manual

Technical information

8.4 Mechanical ambient conditions

Emission of radio interference
The following table shows the emitted interference from electromagnetic fields according to
EN 61000-6-4, measured at a distance of 10 m.
From 30 to 230 MHz
From 230 to 1000 MHz
See also
Notes about usage (Page 30)
8.4 Mechanical ambient conditions
8.4.1

Storage conditions

The following information is for a device that is transported and stored in its original
packaging.
The device meets the requirements according to IEC 60721-3-2 Class 2M2 with the following
amendments and limitations:
Type of condition
Free fall
Vibration according to IEC 60068-2-6
Shock according to IEC 60068-2-27
8.4.2

Operating Conditions

The following information applies to a device installed according to the specifications in these
operating instructions.
The device was tested based on IEC 60721-3-3 Class 3M3 with the following amendments
and limitations:
Type of condition
Vibration according to IEC 60068-2-6
Shock according to IEC 60068-2-27
Shock pulses within the specified range can be transferred to the display but do not impact
the functionality of the device.
190
< 40 dB (μV/m) quasi-peak
< 47 dB (μV/m) quasi-peak
Permitted range
≤ 1 m
5 .. 8.4 Hz, deflection 3.5 mm
8.4 ... 500 Hz, acceleration 1 g
250 m/s
Permitted range
5 ... 8.4 Hz, deflection 3.5 mm
8.4 ... 150 Hz, acceleration 1 g
150 m/s
Operating Instructions, 07/2017, A5E36770603-AB
, 6 ms, 1000 shocks
2
, 11 ms, 3 shocks
2
Comfort Panels