Scope Of Functions With Wincc - Siemens SIMATIC HMI KP400 Comfort Operating Instructions Manual

8.12

Scope of functions with WinCC

The tables below show the objects which can be integrated in a project for an HMI device.
Note
The specified values are maximum values of the individual objects. Simultaneous use of
multiple objects with their maximum value can lead to problems in the active project.
Alarms
Object Specification
Alarms Number of discrete alarms
Number of analog alarms
Alarm length
Number of tags / process values
in an alarm
Number of alarm classes
Display
Acknowledge error alarm
individually
Edit alarm
Alarm indicator
ALARM_S Display S7 alarms
Alarm buffer, Alarm buffer capacity
retentive
Simultaneously queued alarm
events
View alarm
Delete alarm buffer
Print alarms line by line
Note
Read the notes on using the internal memory
If too many alarms are written to the alarm buffer in short time intervals, the life of the
internal memory and thus the service life of the HMI device will be reduced.
When configuring alarms, read the notes on the internal memory in the section
"Memory concept (Page 61)".
Comfort Panels
Operating Instructions, 07/2017, A5E36770603-AB
KP400 Comfort KP700 Comfort to
KTP400 Comfort KP1200 Comfort,
TP700 Comfort to
TP1200 Comfort
2000
50
Alarm window, alarm view
256
64
Technical information
8.12 Scope of functions with WinCC
HMI devices
KP1500 Comfort,
TP1500 Comfort to
TP2200 Comfort
4000
200
80 characters
Max. 8
32
Yes
Yes
Yes
Yes
1024
500
Yes
Yes
Yes
6000
227