Siemens SIMATIC HMI KP400 Comfort Operating Instructions Manual page 108

Commissioning the device
4.3 Parameter assignment for Comfort Panel
Assigning sounds and events
1. Change to the "Sound" tab.
2. Under "Event", select the event to which you want to assign a sound.
Events to which a sound is already assigned are marked with a loudspeaker symbol.
3. Select the desired sound for the event under "Sound":
– Select either a standard sound or use "Browse" to select a "*.WAV" file from the file
– Test the sound with "Play", if required.
– Stop the output with "Stop", if required.
4. Confirm your entries with "OK".
Sounds and properties of acoustic signals are set.
108
system.
Operating Instructions, 07/2017, A5E36770603-AB
Comfort Panels