Siemens SIMATIC HMI KP400 Comfort Operating Instructions Manual page 44

Mounting and connecting the HMI device
3.2 Mounting the device
Procedure
Note
Risk of guaranteed degree of protection not being met
If the mounting seal is damaged or protrudes beyond the HMI device, the degree of
protection is not ensured.
Checking the placement of the mounting seal
To avoid leakage around the mounting cutout, do not install the mounting seal turned inside
out. If the mounting seal is damaged, order a replacement seal.
Note
Installation of the HMI device
Always mount the HMI device according to the instructions in this manual.
44
Mounting clips for 4" models:
Mounting clips for 7", 9", and 12" models:
Mounting clips for 15", 19" and 22" models:
Operating Instructions, 07/2017, A5E36770603-AB
Comfort Panels