Table of Contents
Advertisement
IH70 Motherboard User Manual
2.2 I/O Equipment Installation
2.2.1 12V DC-IN
The IH 70 SBC Motherboard allows plugging 12V DC-IN jack on the board without
another power module converter under power consumption by Intel® 4th
Generation Core i7/i5/i3 Processor and QM87 chipset.
2.2.2 Serial COM Ports
Three RS-232 connectors build in the rear I/O. One optional COM ports support
RS-422/485. When an optional touch-screen is ordered with PPC, serial com port can
connect to a serial or an optional touch-screen
2.2.3 VGA
The Motherboard has one VGA port that can be connected to an external CRT/ LCD
monitor. Use VGA cable to connect to an external CRT / LCD monitor, and connect the
power cable to the outlet. The VGA connector is a standard 15-pin D-SUB connector.
2.2.4 Ethernet Interface
The Motherboard is equipped with Intel® 82574L Gigabit-LAN Controller + I218LM
Gigabit-LAN PHY which is fully compliant with the PCI 10/100/1000 Mbps Ethernet
protocol compatible. It is supported by major network operating systems. The
Ethernet ports provide two standard RJ-45 jacks.
2.2.5 USB Ports
Eight USB devices (four with pin headers) may be connected to the system though an
adapter cable. Various adapters may come with USB ports. USB usually connect the
external system to the system. The USB ports support hot plug-in connection.
Whatever, you should install the device driver before you use the device.
8
Advertisement
Table of Contents
