I/O Equipment Installation; Dc In; Serial Com Port; Hdmi - Winmate IT70 User Manual

12 IT70 Motherboard User Manual

2.3 I/O Equipment Installation

2.3.1 12V DC in
The IT70 Motherboard allows plugging 12V DC-IN jack on the board without another power module
converter under power consumption by Intel® 11th Generation Core i7/i5/i3 Processor.

2.3.2 Serial COM Port

Two COM Port Pin Headers build in the motherboard. Optional one COM ports support RS- 422/485.
*When an optional touch-screen is ordered with PPC, serial com port can connect to a serial or an
optional touch-screen.

2.3.3 HDMI

The Motherboard has one HDMI port that can be connected to an external LCD monitor. Use HDMI
cable to connect to an external LCD monitor, and connect the power cable to the outlet. The HDMI
connector is a standard 19-pin HDMI connector.

2.3.4 Display Port

The Motherboard has one Display Port that can be connected to an external LCD monitor. Using
Display Port cable to connect to an external LCD monitor, and connect the power cable to the power
outlet. The Display Port connector is a standard 20-pin DP connector.

2.3.5 Ethernet Interface

The Motherboard is equipped with dual Gigabit-LAN Controllers which are fully compliant with the
PCIe 10/100/1000 Mbps Ethernet protocol compatible. It is supported by major network operating
systems. The Ethernet ports provide two standard RJ-45 jacks.

2.3.6 USB Port

Eight USB devices (four with pin headers) may be connected to the system though an adapter cable.
Various adapters may come with USB ports. USB usually connect the external system to the system.
The USB ports support hot plug-in connection. Whatever, you should install the device driver before
you use the device.

2.3.7 Audio

The Audio channel capabilities are provided by a Realtek chipset supporting digital audio outputs.
The audio interface includes two jacks: line-out and mic-in.