Table of Contents
Advertisement
23
Chapter 2: Hardware Installation
2.3 I/O Equipment Installation
2.3.1 12V DC in
The IK32 Motherboard allows plugging 12V DC-IN jack on the board without another power module
converter under power consumption by Intel® 7th Generation Core i5 Processor.
2.3.2 Serial COM Port
Three RS-232 connectors build-in the rear I/O. One optional COM port supports
RS-422/ 485. When an optional touch-screen ordered with PPC, serial COM port can be connected
to a serial or an optional touch-screen. You can change serial COM port setting through BIOS.
2.3.3 External HDMI
The Motherboard has one HDMI port that can be connected to an external LCD monitor by HDMI
cable, and it also needs to be connected to the outlet by power cable. The HDMI connector is a
standard 19-pin Type A connector.
2.3.4 Ethernet Interface
The Motherboard is equipped with Intel® Gigabit-LAN Controller. It is supported by major network
operating systems. The Ethernet ports provide two standard RJ-45 jacks.
2.3.5 USB Ports
Six USB devices (four with pin headers) can be connected to the system through an adapter cable.
Various adapters may come with USB ports. USB usually connected the external system. The USB
ports support hot plug-in connection. Whatever, you should install the device driver before you use
the device.
2.3.6 Audio
The High-Definition Audio Codec capabilities are provided by a Realtek chipset supporting digital
audio outputs. The audio interface includes three jacks: line-in, line-out and mic-in
Advertisement
Table of Contents
