Displaying And Maintaining The Dhcpv6 Client; Stateless Dhcpv6 Configuration Example; Network Requirements; Configuration Procedure - HP 3600 v2 Series Configuration Manual

Step
1. Enter system view.
2. Set the DSCP value for the DHCPv6
packets sent by the DHCPv6 client.

Displaying and maintaining the DHCPv6 client

Task
Display DHCPv6 client
information.
Display DHCPv6 client
statistics.
Display the DUID of the local
device.
Clear DHCPv6 client statistics.

Stateless DHCPv6 configuration example

Network requirements

As shown in
name, and other information from the server.
Switch B acts as the gateway to send RA messages periodically.
Figure 70 Network diagram

Configuration procedure

Configure Switch B:
1.
# Enable the IPv6 packet forwarding function.
<SwitchB> system-view
Command
display ipv6 dhcp client [ interface interface-type
interface-number ] [ | { begin | exclude | include }
regular-expression ]
display ipv6 dhcp client statistics [ interface
interface-type interface-number ] [ | { begin |
exclude | include } regular-expression ]
display ipv6 dhcp duid [ | { begin | exclude |
include } regular-expression ]
reset ipv6 dhcp client statistics [ interface
interface-type interface-number ]
Figure 70, through stateless DHCPv6, Switch A obtains the DNS server address, domain
Command
system-view
ipv6 dhcp client dscp
dscp-value
164
Remarks
N/A
Optional.
By default, the DSCP value in
DHCPv6 packets is 56.
Remarks
Available in any view
Available in any view
Available in any view
Available in user view