Enabling Common Proxy Arp; Enabling Local Proxy Arp - HP 3600 v2 Series Configuration Manual

Figure 7 Application environment of local proxy ARP
Enable local proxy ARP in one of the following cases:
Hosts connecting to different isolated Layer 2 ports in the same VLAN need to communicate at
•
Layer 3.
If a super VLAN is configured, hosts in different sub VLANs of the super VLAN need to communicate
•
at Layer 3.
If an isolate-user-VLAN is configured, hosts in different secondary VLANs of the isolate-user-VLAN
•
need to communicate at Layer 3.

Enabling common proxy ARP

To enable common proxy ARP in VLAN interface view/Layer 3 Ethernet port view/Layer 3 aggregate
interface view:
Step
1. Enter system view.
2. Enter interface view.
3. Enable proxy ARP.

Enabling local proxy ARP

To enable local proxy ARP in VLAN interface view/Layer 3 Ethernet port view/Layer 3 aggregate
interface view:
Step
1. Enter system view.
2. Enter interface view.
3. Enable local proxy ARP.
Command
system-view
interface interface-type interface-number
proxy-arp enable
Command
system-view
interface interface-type interface-number
local-proxy-arp enable [ ip-range startIP to endIP ]
15
Remarks
N/A
N/A
Disabled by default
Remarks
N/A
N/A
Disabled by default