HP 3600 v2 Series Configuration Manual page 210

Hide thumbs Also See for 3600 v2 Series:
Table of Contents

Advertisement

[Switch-Ethernet1/0/3] port service-loopback group 1
[Switch-Ethernet1/0/3] quit
# Configure an ISATAP tunnel.
[Switch] interface tunnel 0
[Switch-Tunnel0] ipv6 address 2001::5efe:0101:0101 64
[Switch-Tunnel0] source vlan-interface 101
[Switch-Tunnel0] tunnel-protocol ipv6-ipv4 isatap
# Disable the RA suppression so that hosts can acquire information such as the address prefix from
the RA message released by the ISATAP switch.
[Switch-Tunnel0] undo ipv6 nd ra halt
# Reference service loopback group 1 on the tunnel.
[Switch-Tunnel0] service-loopback-group 1
[Switch-Tunnel0] quit
# Configure a static route to the ISATAP host.
[Switch] ipv6 route-static 2001:: 16 tunnel 0
Configure the ISATAP host:
The specific configuration on the ISATAP host is related to its operating system. The following
example shows the configuration of the host running the Windows XP.
# Install IPv6.
C:\>ipv6 install
# On a Windows XP-based host, the ISATAP interface is usually interface 2. Configure the IPv4
address of the ISATAP router on the interface to complete the configuration on the host. Before
doing that, display the ISATAP interface information:
C:\>ipv6 if 2
Interface 2: Automatic Tunneling Pseudo-Interface
Guid {48FCE3FC-EC30-E50E-F1A7-71172AEEE3AE}
does not use Neighbor Discovery
does not use Router Discovery
routing preference 1
EUI-64 embedded IPv4 address: 0.0.0.0
router link-layer address: 0.0.0.0
preferred link-local fe80::5efe:2.1.1.2, life infinite
link MTU 1280 (true link MTU 65515)
current hop limit 128
reachable time 42500ms (base 30000ms)
retransmission interval 1000ms
DAD transmits 0
default site prefix length 48
# A link-local address (fe80::5efe:2.1.1.2) in the ISATAP format was automatically generated for
the ISATAP interface. Configure the IPv4 address of the ISATAP switch on the ISATAP interface.
C:\>ipv6 rlu 2 1.1.1.1
# Display information on the ISATAP interface.
C:\>ipv6 if 2
Interface 2: Automatic Tunneling Pseudo-Interface
Guid {48FCE3FC-EC30-E50E-F1A7-71172AEEE3AE}
does not use Neighbor Discovery
199

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents