Configuration Procedure; Displaying And Maintaining Ip Addressing - HP 3600 v2 Series Configuration Manual

Configuration procedure

To configure IP unnumbered on an interface:
Step
Enter system view.
1.
2. Enter tunnel interface view.
3. Specify the current interface to
borrow the IP address of the
specified interface.

Displaying and maintaining IP addressing

Task
Display IP configuration information
for a specified Layer 3 interface or all
Layer 3 interfaces.
Display brief IP configuration
information for a specified Layer 3
interface or all Layer 3 interfaces.
Command
system-view
interface tunnel number
ip address unnumbered interface
interface-type interface-number
Command
display ip interface [ interface-type
interface-number ] [ | { begin | exclude |
include } regular-expression ]
display ip interface [ interface-type
[ interface-number ] ] brief [ | { begin |
exclude | include } regular-expression ]
28
Remarks
N/A
N/A
The interface does not borrow IP
addresses from other interfaces by
default.
Remarks
Available in any view
Available in any view