Special Ip Addresses; Subnetting And Masking - HP 3600 v2 Series Configuration Manual

Class
B
C
D
E

Special IP addresses

The following IP addresses are for special use and cannot be used as host IP addresses.
IP address with an all-zero net ID—Identifies a host on the local network. For example, IP address
•
0.0.0.16 indicates the host with a host ID of 16 on the local network.
IP address with an all-zero host ID—Identifies a network.
•
IP address with an all-one host ID—Identifies a directed broadcast address. For example, a packet
•
with the destination address of 192.168.1.255 will be broadcast to all the hosts on the network
192.168.1.0.

Subnetting and masking

Subnetting divides a network down into smaller networks called subnets by using some bits of the host ID
to create a subnet ID.
Masking identifies the boundary between the host ID and the combination of net ID and subnet ID.
(When subnetting is not adopted, a mask identifies the boundary between the net ID and the host ID.)
Each subnet mask is made up of 32 bits that correspond to the bits in an IP address. In a subnet mask,
consecutive ones represent the net ID and subnet ID, and consecutive zeros represent the host ID.
Before being subnetted, Class A, B, and C networks use the following default masks (also called natural
masks): 255.0.0.0, 255.255.0.0, and 255.255.255.0 respectively.
Figure 13 shows how a Class B network is subnetted.
Figure 13 Subnetting a Class B network
Subnetting increases the number of addresses that cannot be assigned to hosts. After being subnetted,
a network can accommodate fewer hosts.
For example, a Class B network without subnetting can accommodate 1022 more hosts than the same
network subnetted into 512 subnets.
Address range
128.0.0.0 to
191.255.255.255
192.0.0.0 to
223.255.255.255
224.0.0.0 to
239.255.255.255
240.0.0.0 to
255.255.255.255
Remarks
N/A
N/A
Multicast addresses.
Reserved for future use except for the broadcast address
255.255.255.255.
24