Troubleshooting Ipv6 Basics Configuration; Symptom - HP 3600 v2 Series Configuration Manual

Hide thumbs Also See for 3600 v2 Series:
Table of Contents

Advertisement

InNoRoutes:
InTooBigErrors:
OutFragOKs:
OutFragCreates:
InMcastPkts:
InMcastNotMembers:
OutMcastPkts:
InAddrErrors:
InDiscards:
OutDiscards:
# Ping Switch A and Switch B on the host, and ping Switch A and the host on Switch B to verify that they
are connected.
IMPORTANT:
When you ping a link-local address, you should use the -i parameter to specify an interface for the
link-local address.
[SwitchB] ping ipv6 -c 1 3001::1
PING 3001::1 : 56
Reply from 3001::1
bytes=56 Sequence=1 hop limit=64
--- 3001::1 ping statistics ---
1 packet(s) transmitted
1 packet(s) received
0.00% packet loss
round-trip min/avg/max = 2/2/2 ms
[SwitchB-Vlan-interface2] ping ipv6 -c 1 2001::15B:E0EA:3524:E791
PING 2001::15B:E0EA:3524:E791 : 56
Reply from 2001::15B:E0EA:3524:E791
bytes=56 Sequence=1 hop limit=63
--- 2001::15B:E0EA:3524:E791 ping statistics ---
1 packet(s) transmitted
1 packet(s) received
0.00% packet loss
round-trip min/avg/max = 3/3/3 ms
The output shows that Switch B can ping Switch A and the host.

Troubleshooting IPv6 basics configuration

Symptom

The peer IPv6 address cannot be pinged.
0
0
0
0
28
0
7
0
0
0
data bytes, press CTRL_C to break
time = 2 ms
data bytes, press CTRL_C to break
time = 3 ms
144

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents