Upnp; Ddns Setting; Rtsp Setting - Wansview Pro HD User Manual

5.3.2.4 UPNP

5.3.2.5 DDNS Setting

5.3.2.6 RTSP Setting

The user can set the RTSP port after entering RTSP Setting bar. In addition, the RTSP Authentication function can be closed.
Default value of RTSP port is: 554 Selection range: 554-65535
Support Email/ Skype: service2@wansview.com
If the user needs to view the camera through the
internet, the router and camera UPNP function Auto
Port Mapping has to be turned on.
The user can access the camera via DDNS domain name
provided by the manufacturer for free and a third party domain
name. Port mapping is required while using domain name to
access (For port mapping, please refer to the FAQ).
party domain name supports 3322.org/dyndns.org/No-iP.com.
Some general RTSP streaming media software can be
adopted to access video on the device, such as VLC.
Access links are as shown below:
The first bit stream: rtsp://user: password @IP:rtsp port
/live/ch0
The second bit stream: rtsp://user: password @IP:rtsp
port /live/ ch1
The third bit stream: rtsp://user: password @IP:rtsp port
/live/ ch2
The third
39