Connections; Dlp Nirscan Connectors (Rear View); Dlp Nirscan Nano Connectors - Texas Instruments DLP NIRscan User Manual

Table of Contents

Advertisement

What is the DLP NIRscan Nano EVM?

1.2.3 Connections

Table 1-3
lists the DLP NIRscan Nano connectors with its locations shown in
BOARD
Microcontroller board
DLP controller board
14
DLP NIRscan Nano Overview
Table 1-3. DLP NIRscan Nano Connectors
SCHEMATIC LABEL
Micro-USB connector: Provides power and PC connectivity with HID
J1
commands
Detector board interface: Provides Tiva's SSI1 connection to ADS1255
J2
and Tiva's I2C7 to TMP006
Expansion connector: Provides TIva's UART4 or SSI0 interface to
J3
external device. UART4 is used as Tiva's console output for debugging
information
JTAG connector: ARM Cortex 10-pin emulation (XDS100, XDS200, or
J4
XDS560) connection
J6
Lithium-Ion or Lithium-Polymer battery connection
J7
Battery thermistor connection
Trigger connector. This connector is covered by the top cover. Access to
J500
this connector requires to removal of the Microcontroller and DLP
controller boards from the optical engine
J501
Lamp photodetector connector
J503
Lamp power connector
Detector
Figure 1-4. DLP NIRscan Connectors (Rear View)
Copyright © 2015, Texas Instruments Incorporated
Figure 1-4
DESCRIPTION
Battery
Thermistor
USB
Battery
DLPU030B – June 2015 – Revised July 2015
www.ti.com
and
Figure
1-5.
Lamp
microSD
Lamp
Photodetector
Submit Documentation Feedback

Advertisement

Table of Contents
loading

Table of Contents