Advertisement

Quick Links

This guide details the use of the TDC7201-ZAX-EVM Evaluation Module (referred to as TDC7201EVM for
the remainder of this document). The TDC7201EVM is an evaluation module that allows users to evaluate
the operation and performance of the TDC7201 Time-to-Digital Converter. One example application that
requires accurate time-to-digital conversion is LIDAR.
The TDC7201EVM connects to the MSP430 LaunchPad evaluation kit for capturing data, and it connects
to a user-friendly Graphic User Interface (GUI) to modify the registers and display the data.
1
2
....................................................................................................................
3
4
5
6
7
8
9
Trademarks
1
General Description
1.1
TDC7201EVM Key Features
1. Evaluate TDC7201 Time-to-Digital Converter
2. Connects with MSP430 Launch Pad (MSP-EXP430F5529LP)
3. User-friendly TDC720xEVM GUI interface
4. Connection for START1, START2, STOP1, and STOP2 inputs
5. Powered by MSP430 LaunchPad (no external power needed)
SNAU198A - May 2016 - Revised May 2016
Submit Documentation Feedback
.........................................................................................................
...............................................................................................................
.........................................................................................................
.....................................................................................................
.........................................................................................................
................................................................................................................
.................................................................................................
.............................................................................................................
Copyright © 2016, Texas Instruments Incorporated
SNAU198A - May 2016 - Revised May 2016
TDC7201-ZAX-EVM
Contents
User's Guide
1
3
3
4
7
10
14
17
19
1
TDC7201-ZAX-EVM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TDC7201-ZAX-EVM and is the answer not in the manual?

Questions and answers

Summary of Contents for Texas Instruments TDC7201-ZAX-EVM

  • Page 1: Table Of Contents

    SNAU198A – May 2016 – Revised May 2016 TDC7201-ZAX-EVM This guide details the use of the TDC7201-ZAX-EVM Evaluation Module (referred to as TDC7201EVM for the remainder of this document). The TDC7201EVM is an evaluation module that allows users to evaluate the operation and performance of the TDC7201 Time-to-Digital Converter.
  • Page 2: General Description

    General Description www.ti.com TDC7201EVM Figure 1. TDC7201EVM Evaluation Board TDC7201-ZAX-EVM SNAU198A – May 2016 – Revised May 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
  • Page 3: Equipment List

    5. Launch the GUI. See Section 6 for more information. 6. On the GRAPH tab, press the START GRAPH button. SNAU198A – May 2016 – Revised May 2016 TDC7201-ZAX-EVM Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
  • Page 4: Software Installation

    Figure 7. On the MSP430 USB Firmware Upgrade GUI, click Upgrade Firmware. 8. Click Close when done. Figure 2. Upgrading MSP430 Firmware TDC7201-ZAX-EVM SNAU198A – May 2016 – Revised May 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
  • Page 5 Device Manager. 4. Scroll down to Ports (COM & LPT) and check TDC7200EVM (COMx) connection as shown in Figure Figure 3. Device Manager SNAU198A – May 2016 – Revised May 2016 TDC7201-ZAX-EVM Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
  • Page 6 3. Run the TDC720xEVM GUI from the Start Menu. By default, it is located in Programs\Texas Instruments\TDC720xEVM. 4. GUI should automatically connect and show the screen depicted in Figure Figure 4. TDC720xEVM GUI TDC7201-ZAX-EVM SNAU198A – May 2016 – Revised May 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
  • Page 7: Hardware Configuration

    Offset = 1.65 V vii. Duty = 20% viii. Burst Trigger Source = External Figure 5. START and STOP Signals Scope Shot SNAU198A – May 2016 – Revised May 2016 TDC7201-ZAX-EVM Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
  • Page 8 MCU whenever a new measurement is started by the TDC7201. See Figure 6 Figure Figure 6. TDC7201EVM Connection Setup TDC7201-ZAX-EVM SNAU198A – May 2016 – Revised May 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
  • Page 9 Hardware Configuration www.ti.com Figure 7. Tektronix AFG3102 Connections SNAU198A – May 2016 – Revised May 2016 TDC7201-ZAX-EVM Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
  • Page 10: Gui And Operation

    GUI and Operation 1. If you haven’t done so, open the TDC720xEVM GUI. The EVM GUI software can be run by clicking on Start, then clicking All Programs, Texas Instruments, and TDC720xEVM and selecting TDC720xEVM. 2. Click on the TDC720x tab and make sure TDC1 is selected with the register configuration in Figure Figure 8.
  • Page 11 Use the values reported in the Measurement Result Registers (Figure 10) to validate the time-of- flight as approximately 19 µs (assuming you follow the instructions as specified in Section 5.1). SNAU198A – May 2016 – Revised May 2016 TDC7201-ZAX-EVM Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
  • Page 12 2: Click on the TDC720x tab and make sure the TDC7201: Select TDCx field is as shown in Figure TDC7201-ZAX-EVM SNAU198A – May 2016 – Revised May 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
  • Page 13 GUI and Operation www.ti.com Figure 11. Recommended TDC7201:TDC2 Register Configuration SNAU198A – May 2016 – Revised May 2016 TDC7201-ZAX-EVM Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
  • Page 14: Board Layout

    Figure 12. TDC7201EVM Top Layer TDC7201-ZAX-EVM SNAU198A – May 2016 – Revised May 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
  • Page 15 Board Layout www.ti.com Figure 13. TDC7201EVM Bottom Layer SNAU198A – May 2016 – Revised May 2016 TDC7201-ZAX-EVM Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
  • Page 16 Board Layout www.ti.com Figure 14. TDC7201EVM Ground Plane TDC7201-ZAX-EVM SNAU198A – May 2016 – Revised May 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
  • Page 17: Tdc7201Evm Schematic

    TDC7201EVM Schematic www.ti.com Figure 15. TDC7201EVM Power Plane TDC7201EVM Schematic The TDC7201EVM Schematic is shown in Figure SNAU198A – May 2016 – Revised May 2016 TDC7201-ZAX-EVM Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
  • Page 18 Short SH-JP1 and SH-JP3 on JP1 pin 1-2 and JP3 pin 1-2 FID1 FID2 FID3 FID4 FID5 FID6 Copyright © 2016, Texas Instruments Incorporated Figure 16. TDC7201EVM Schematic TDC7201-ZAX-EVM SNAU198A – May 2016 – Revised May 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
  • Page 19: Bill Of Materials

    TP1, TP2, TP3, Header, 100mil, 1pos, Gold, TH Testpoint TSW-101-07-G- Samtec TP6, TP7, TP8 TP10 Connector, TH, SMA 142-0701-201 Emerson Network Power SNAU198A – May 2016 – Revised May 2016 TDC7201-ZAX-EVM Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
  • Page 20 Changes from Original (May 2016) to A Revision ......................Page ........................• Changed link to Gui ........................• Changed link to Gui Revision History SNAU198A – May 2016 – Revised May 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
  • Page 21 IMPORTANT NOTICE FOR TI DESIGN INFORMATION AND RESOURCES Texas Instruments Incorporated (‘TI”) technical, application or other design advice, services or information, including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, “TI Resources”) are intended to assist designers who are developing applications that incorporate TI products;...
  • Page 22 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Texas Instruments TDC7201-ZAX-EVM...

Table of Contents