Dlp Nirscan Nano Command Description; Command Handler Supported Commands; Dlp Nirscan Nano Supported Commands - Texas Instruments DLP NIRscan User Manual

G.1

Command Handler Supported Commands

The DLP NIRscan Nano Command Handler supports a set of commands described in
READ /
DESCRIPTION
WRITE
READ Perform file checksum
WRITE Write file data
WRITE Write file size
READ Read file size
READ Read file data
WRITE Update Tiva firmware
READ EEPROM test
READ Detector board test
READ Battery charger test
READ SDRAM test
WRITE DLP Controller power up test
READ Temperature sensor test
READ Humidity sensor test
WRITE Bluetooth test
READ microSD Card test
READ LED test
READ Read button test
WRITE Write button test
FACTORY USE ONLY: Write
EEPROM Calibration
Coefficient, Scan
WRITE
Configuration, and Reference
Calibration Coefficients
(1)
Versions
READ Read version information
WRITE Write patterns in SDRAM
WRITE Start scan
(1)
Commands highlighted in red are for factory calibration. Erasing the factory calibration data will render a unit non-functional and
will need to be recalibrated.
58

DLP NIRscan Nano Command Description

DLP NIRscan Nano Command Description
Table G-1. DLP NIRscan Nano Supported Commands
USB
OPCODE
BYTE 1 BYTE 2
0x00 0x15
0x00 0x25
0x00 0x2C
0x00 0x2D
0x00 0x2E
0x00 0x2F
0x01 0x01
0x01 0x02
0x01 0x03
0x01 0x04
0x01 0x05
0x01 0x06
0x01 0x07
0x01 0x08
0x01 0x09
0x01 0x0B
0x01 0x0C
0x01 0x0D
0x01 0x0E
0x02 0x16
0x02 0x17
0x02 0x18
Copyright © 2015, Texas Instruments Incorporated
DLPU030B – June 2015 – Revised July 2015
COMMUNICATIONS INTERFACE
BLUETOOTH
SERVICE NAME SERVICE UUID
Device Information
0x180A
Service Table I-1
GATT Scan Data 0x53455206-444C- 0x4348411D-444C-
Information Service 5020-4E49-
Table I-7 52204E616E6F
DLPU030B – June 2015 – Revised July 2015
Submit Documentation Feedback
Appendix G
Table G-1.
CHARACTERISTI
C UUID
0x2829, 0x2A24,
0x2A26, 0x2A27,
0x2A28
5020-4E49-
52204E616E6F