Intermec CN2 User Manual page 30

Chapter 1 — Using the CN2 Handheld Computer
To attach the USB keyboard
1 Read the CN2 Modem Dock Quick Start Guide
(P/N 075481).
2 Connect the USB keyboard to the keyboard port on the
modem dock.
Keyboard
port
3 Connect the AC power supply (P/N 074246) to the power
port on the modem dock. Then connect the AC power
supply to an AC power source.
You must use only the Intermec power supply approved
for use with the CN2. Using any other power supply
will damage the CN2.
Attention: Vous devez utiliser seulement le bloc
d'alimentation Intermec désigné pour le CN2.
L'utilisation d'autre blocs d'alimentation endommagera
le CN2.
Vorsicht: Mit dem Modell CN2 darf nur der dazu
genehmigte Intermec-Netzteil verwendet werden. Die
Verwendung eines anderen Netzteils wird das Modell
CN2 beschädigen.
Note: If you cannot connect the modem dock to an AC
power source, you can configure the CN2 to use its battery
to power the USB keyboard. In Step 4c, set USB Host
Power to Always On. However, you will have to charge
the CN2 battery more often.
30
USB Phone Power
port port port
CN2 Handheld Computer User's Manual