Intermec CN2 User Manual page 28

Chapter 1 — Using the CN2 Handheld Computer
5 Install the battery door.
To access files stored on the SD card
• If you have an SD card inserted in your CN2, it appears as
the SDMMC Disk folder. To access this folder, double-tap
the My Computer icon on the desktop and then double-tap
the SDMMC Disk folder. You can copy files to and from this
folder just as you would any other folder on the CN2.
To remove the SD card
1 Press and hold the Power key for 2 to 3 seconds, and then
release the Power key to turn off the CN2.
2 Place the CN2 face-down on a clean, flat, stable surface.
3 Push down on the battery door latch, and pull up on the
battery door.
4 Remove the battery door and set it aside.
5 Insert the stylus between the battery and the CN2 case, and
press straight down until the battery is released.
28
Battery
CN2 Handheld Computer User's Manual