Intermec CN2 User Manual page 27

Hide thumbs Also See for CN2:
Table of Contents

Advertisement

To insert the SD card
1 Before inserting the SD card, you must attach one of the
pull-tabs that ships with the CN2. An SD card without a
pull-tab can be very difficult to remove.
2 Align the SD card as shown in the next illustration, and insert
the SD card into the slot.
3 Push the card into the slot until it is fully inserted.
4 Align the battery contacts as shown in the next illustration,
and insert the battery in the battery compartment. Press
down on the battery until it clicks into place.
CN2 Handheld Computer User's Manual
Chapter 1 — Using the CN2 Handheld Computer
SD Card
Tab
SD card
Tab
Fully inserted
SD card
27

Advertisement

Table of Contents
loading

Table of Contents