Intermec CN2 User Manual page 7

4 Replace the battery door.
5 Connect the AC power supply (P/N 074246) to the power
connector on the back of the CN2 communications dock
(P/N 225-696-001), and then connect the power cord to the
AC power supply.
You must use only the Intermec power supply approved
for use with the CN2. Using any other power supply will
damage the CN2.
Attention: Vous devez utiliser seulement le bloc
d'alimentation Intermec désigné pour le CN2.
L'utilisation d'autre blocs d'alimentation endommagera le
CN2.
Vorsicht: Mit dem Modell CN2 darf nur der dazu
genehmigte Intermec-Netzteil verwendet werden. Die
Verwendung eines anderen Netzteils wird das Modell
CN2 beschädigen.
Note: For help installing and using the communications
dock, see the CN2 Communications Dock Quick Start Guide
(P/N 930-061-001), which shipped with the dock.
CN2 Handheld Computer User's Manual
Chapter 1 — Using the CN2 Handheld Computer
Battery
7