Running Multiple Applications On The Cn2 - Intermec CN2 User Manual

Chapter 1 — Using the CN2 Handheld Computer
You can change the beeper volume for your needs and
environment. You can set the beeper volume to Off, Low
(quiet), Medium, High (loud), and Very high (very loud). The
default setting is Very high.
To change the beeper volume
1 Tap the Start icon and tap Intermec Settings. The Intermec
Settings application appears.
2 Tap Device Settings > Beeper > Volume.
3 Select a volume level.
4 Tap
Settings.

Running Multiple Applications on the CN2

You can simultaneously run several applications on your CN2.
For example, you can check e-mail in your Inbox, view a web
site in Internet Explorer, and open a couple of documents in
WordPad. The last application that you open is the current task,
the one that is currently active on the screen.
The CN2 gives you two ways to manage multiple tasks:
• You can use the Task Manager to view, switch between, and
end tasks. For details, see the next section.
• You can use the Active Applications List to view and switch
between active tasks. For details, see page 24.
Using Task Manager to Manage Multiple Active Tasks
You can use Task Manager on the CN2 to view all the active
tasks, to switch to another active task, and to end a task. Task
Manager is especially helpful on the CN2 for switching between
several running tasks.
To start Task Manager on a CN2 with the numeric keypad
• Press Alt-TAB by following this key sequence:
a Press
22
to save your settings and tap
. The icon appears in the taskbar and Green
mode is locked.
CN2 Handheld Computer User's Manual
X to exit Intermec