Cisco ASR 1001-X Router Specifications
Description
Weight
Nominal operating temperature
Nominal operating humidity
Storage temperature
Power consumption
Cisco ASR 1004 Router Memory and Storage Options
The following table lists the hardware memory and storage options supported on the Cisco ASR 1004 Router.
Table 33: Memory and Storage Options for Cisco ASR 1004 Router
Memory Type
RP1
eUSB
Cisco ASR 1004 Router Ethernet RJ-45 Port Pinouts
The Cisco ASR 1004 Router has RJ-45 port for the 10/100/1000 Ethernet connection. The RJ-45 port supports
IEEE 802.3ab (Gigabit Ethernet) and IEEE 802.3u (Fast Ethernet) interfaces compliant with 10BASET,
100BASETX, and 1000BASET specifications.
The RJ-45 port supports standard straight-through and crossover Category 5 UTP cables with RJ-45 connectors.
Cisco does not supply Category 5 UTP cables; these cables are available commercially.
Specification
• Fully loaded chassis: 50 pounds (22.6796 kg)
• Only chassis: 18 pounds (8.16 kg)
• 41° to 104° F
• 5° to 40° C
10% to 85%
• –38° to 150° F
• –40° to 70° C
• Maximum DC: 1020W
• Maximum AC: 960W
• Maximum (Out): 765W
Default
2 GB DRAM
1 GB (Partitioned: 2x32MB for NVRAM
and the remaining for mass storage
Cisco ASR 1004 Router Memory and Storage Options
Maximum System Support
4 GBDRAM
For mass storage: hard disk drive 40 GB
or solid-state drive 32Gb support
Cisco ASR 1001-X Router Hardware Installation Guide
125