Cautions And Regulatory Compliance Statements For Nebs - Cisco ASR 1001-X Hardware Installation Manual

Cautions and Regulatory Compliance Statements for NEBS

You must observe the following safety guidelines when working with any equipment that connects to electrical
power or telephone wiring. These guidelines help you avoid injuring yourself or damaging the devices.
The NEBS information is for reference. The Cisco ASR 1001-X Router is not NEBS certified.
Note
Table 10: Compliance Requirements
EMC/Safety Compliance and NEBS Requirements
Specification
EMC/Safety
Telcordia NEBS GR-1089-Core Statement
The English warnings in this document are followed by a statement number. To see the translations of a
Note
warning in other languages, look up its statement number in
for the Cisco Aggregation Services Router 1000 Series

Cautions and Regulatory Compliance Statements for NEBS

The following table lists cautions, regulatory compliance statements, and requirements for the Network
Equipment-Building System (NEBS) certification from the Telcordia Electromagnetic Compatibility and
Electrical Safety – Generic Criteria for Network Telecommunications Equipment (A Module of LSSGR,
FR-64; TSGR, FR-440; and NEBSFR, FR-2063) Telcordia Technologies Generic Requirements,
GR-1089-CORE.
Attach an ESD-preventive wrist strap to your wrist and to a bare metal surface.
Cisco ASR 1001-X Router Hardware Installation Guide
26
Preparing Your Site for Installation
Description
Caution Shielded twisted pair T1/E1 cables must
be used with the 8-port channelized T1/E1
SPA interfaces in any Cisco ASR 1000
chassis. This is required for compliance
with Class A emission requirements for
EMC.
Shielded twisted pair T1/E1 cables must
Caution
be used with any of the T1/E1 NIM
interfaces in any Cisco ASR 1000 chassis.
This is required for compliance with Class
A emission requirements for EMC.
To comply with the Telcordia GR-1089
Caution
NEBS standard for electromagnetic
compatibility and safety, for Ethernet
RJ-45 ports, use only shielded Ethernet
cables that are grounded on both ends. In
a NEBS installation, all Ethernet ports are
limited to intrabuilding wiring.
Regulatory, Compliance, and Safety Information
.