Checking The Shipping Container Contents - Cisco ASR 1001-X Hardware Installation Manual

Preparing Your Site for Installation

Checking the Shipping Container Contents

Use the components list shown in
page 43
container. You need the container if you move or have to ship the Cisco ASR 1001-X Router in the future.
Table 16: Cisco ASR 1001-X Router Shipping Container Contents
Component
Chassis
Accessories Kit
Note
ESD, Wrist Strap (disposable)
Documentation
Optional Equipment
Table 16: Cisco ASR 1001-X Router Shipping Container Contents , on
to check the contents of the Cisco ASR 1001-X Router shipping container. Do not discard the shipping
You must order the Accessories Kit
separately if you order the Cisco ASR
1001-X Router chassis as a spare.

Checking the Shipping Container Contents

Description
Cisco ASR 1001-X Routers are configured with dual
AC or dual DC power supplies and a shared port
adapter and NIM blank panel if a shared port adapter
or NIM has not been ordered.
Front and rear chassis rack-mount brackets that you
will attach to the chassis with the respective screws
Three sets of screws, one each for:
• Front rack-mount brackets (use the black
screws)
• Rear rack-mount brackets (use the package with
the 5 screws)
• Cable-management brackets (use the package
with the 4 screws)
Two cable-management brackets with U-feature
design devices attached.
1 RJ-45 to RJ-45 crossover cable
1 RJ-45 to DB-9 (female) adapter
One disposable wrist strap
Regulatory Compliance and Safety Information for
the Cisco ASR 1000 Series Aggregation Services
Routers
Power cord if an AC power supply was shipped.
There are none for the DC power supply units.
Cisco ASR 1001-X Router Hardware Installation Guide
43