Cisco Asr 1013 Router Memory And Storage Options; Cisco Asr 1013 Router Ethernet Rj-45 Port Pinouts; Cisco Asr 1013 Router Mgmt Ethernet Port Signals And Pinouts - Cisco ASR 1001-X Hardware Installation Manual

Cisco ASR 1001-X Router Specifications

Cisco ASR 1013 Router Memory and Storage Options

Table 48: Memory and Storage Options for Cisco ASR 1013 Router
Memory Type
R21– DRAM
FECP – DRAM
eUSB – Internal Flash + NVRAM

Cisco ASR 1013 Router Ethernet RJ-45 Port Pinouts

The Cisco ASR 1013 Router has RJ-45 port for the 10/100/1000 Ethernet connections. The RJ-45 port supports
IEEE 802.3ab (Gigabit Ethernet) and IEEE 802.3u (Fast Ethernet) interfaces compliant with 10BASET,
100BASETX, and 1000BASET specifications.
The RJ-45 port supports standard straight-through and crossover Category 5 UTP cables with RJ-45 connectors.
Cisco does not supply Category 5 UTP cables; these cables are available commercially.

Cisco ASR 1013 Router MGMT Ethernet Port Signals and Pinouts

Table 49: Management Ethernet 10/100/1000 RJ-45 Port Pinouts for Cisco ASR 1013 Router
Pin
1
2
3
4, 5
6
7,8
Default
8 GB
1 GB for ASR1000-ESP-5
2 GB for ASR1000-ESP10
8 GB on the integrated RP on the Cisco
ASR 1002 Router (partitioned: 1 GB for
bootflash; 7 GB for mass storage)
Signal
TX Data+
TX Data–
RX Data+
NC
RX Data–
NC
Cisco ASR 1013 Router Memory and Storage Options
Maximum System Support
8 GB
2 GB
8 GB – Not Field Upgradeable
Direction
Output
Output
Input
—
Input
—
Cisco ASR 1001-X Router Hardware Installation Guide
Description
Transmit Data
Transmit Data
Receive Data
—
Receive Data
—
135