Repacking The Router - Cisco ASR 1001-X Hardware Installation Manual

Repacking the Router

NAME: "SPA subslot 0/0", DESCR: "8-port Built-in GE SPA"
PID: BUILT-IN-2T+6X1GE , VID: , SN:
NAME: "module R0", DESCR: "Cisco ASR1001-X Route Processor"
PID: ASR1001-X , VID: V00, SN: JAE1719030S
NAME: "module F0", DESCR: "Cisco ASR1001-X Embedded Services Processor"
PID: ASR1001-X , VID: , SN:
Router#
Step 9 Use the dir hardisk: command to verify whether the total file size of the hard disk partitions are correct. For example:
Example:
Router# dir harddisk:
Directory of harddisk:
11 drwx 16384 Jul 16 2014 11:30:24 -03:00 lost+found
787616940032 bytes total (747608293376 bytes free)
Router#
You have completed the NIM-SSD replacement procedure.

Repacking the Router

If your system is damaged, you must repack it for return shipment.
Before you return the router or move the router to a different location, repack the system using the original
packaging material.
Cisco ASR 1001-X Router Hardware Installation Guide
118
Removing and Replacing FRUs from the Cisco ASR 1001-X Router