Instructions For Replacing The Lamps - ergoline BALANCE 700 HYBRID PERFORMANCE Operating Instructions Manual

Cleaning and maintenance
52/70
4.8

Instructions for replacing the lamps

DANGER!
Danger of burns from hot lamps and surfaces!
Finger and hands may get burned when replacing lamps.
– Before carrying out maintenance work, wait until the
device has cooled down sufficiently.
The lamp effect decreases over the course of time. As such, the replacement
intervals specified in the maintenance plan must be adhered to.
NOTICE:
Small quantities of mercury can escape if the bulb/lamp
glass breaks!
Please comply with the following instructions:

Immediately disconnect the device from the mains
power.

Children must leave the room immediately.

Ventilate the room for at least 15 minutes.

Put on disposable gloves.

With the window open: Collect the glass shards and
escaped mercury in a sealable container.

Bring the container to a collection site for waste lamps.