Cleaning The Filter In The Base - ergoline BALANCE 700 HYBRID PERFORMANCE Operating Instructions Manual

12/2014 1015739-00
4.12

Cleaning the filter in the base

– Opening the bed base: see page 51.
– Remove the filters.
– Cleaning the filters when moist or dry.
Dry cleaning: Vacuum cleaner (depending on the degree of soiling)
Moist cleaning: Use water and detergent or put in a dish-washer
WARNING!
The device may be damaged by moisture!
The cleaned filters must be dry before they are replaced.
– Refit the cleaned and dried filters.
– Close the bed base. You should hear the bed base click into place.
Cleaning and maintenance
Operating instructions – 57/70