Appendix; Jk Timer Controls; Equivalence Key Range - ergoline INSPIRATION 600 Operating Instructions Manual

6

Appendix

04144 / 0
07/2017 1018663-00
6.1

JK timer controls

The following coin modules/time control systems can be utilized with the
INSPIRATION series devices.
MCS III plus
Order no.: 500000456
Studiopilot
Order no.: 34009900
6.2

Equivalence key range

Example for calculating the equivalence key range (1), see the lamp
configuration sticker:
If the equivalence key of the lamp with which the device has been equipped
during the type approval is
the equivalence key range with which the device should be marked is calcu-
lated as follows:
Bottom value of the X section:
Bottom value of the Y section:
Top value of the Y section:
X is rounded up to the next whole value, Y will be rounded to the first decimal
place after the point. The equivalence key range for fluorescent lamps is then:
100–R–47/3.2,
0.75 x 47 = 35.25
0.85 x 3.2 = 2.72
1.15 x 3.2 = 3.68
Operating instructions – 63/68
Appendix