Decommissioning; Storage; Disposal; Directives - ergoline INSPIRATION 600 Operating Instructions Manual

Safety instructions and warnings
16/68
1.5.7

Decommissioning

The device must be disconnected from the power supply in order to tempo-
rarily or permanently decommission it.
You must abide by the legal disposal requirements when permanently de-
commissioning the device.
1.5.8

Storage

Store the devices in a dry, frost-free location with a stable temperature. Once
the device has cooled off, pack it in plastic wrapping to protect it against
scratches.
Storage temperature: Between -15 °C and +60 °C

1.5.9

Disposal

Environmental regulations –
disposal of lamps and batteries
UV lamps contain fluorescent materials and other waste containing mercury.
Batteries contain heavy metal compounds.
Outside Germany, the respective national legislation applies. Please contact
your local sales agency.
Packaging
All packaging consists of 100 % recyclable materials. Packaging brought into
circulation by the JK Corporate Group that is no longer required can be re-
turned to the JK Corporate Group. Your partner agency or dealer will be hap-
py to advise.
Disposal of old devices
The device has been manufactured using recyclable materials. The JK Corpo-
rate Group will provide you with information on the content or potential haz-
ards of the materials used.
The components and devices are labelled with the following symbol:
The device will, if requested, be properly disposed of by the JK Corporate
Group. This service is available free of charge. Your partner agency or dealer
will be happy to advise.
1.5.10

Directives

This device was built according to the following directives:
EC directive 'Electromagnetic Compatibility' 2004/108/EC

(according to the version valid at the time)
EC Machinery Directive 2006/42/EC (according to the version valid at the

time)
Low voltage directive 2006/95/EC (according to the version valid at the

time)