Removing The Front Panel - ergoline PASSION 300-S SUPER POWER Operating Instructions Manual

03/2012 1006324-02
5.7.4

Removing the front panel

– Remove the acrylic glass panel: see page 45.
– If necessary, remove the screws from the inside.
– Carefully lift the upper edge of the front panel out of the holder (pull up-
wards).
– Lift the front panel in order to lift it out of the two lower hooks.
– Then remove the front panel to the front and lay it aside.
The assembly is the same process in reverse order.
DANGER!
Danger of crushing fingers when inserting the front
panel!
Fingers can be jammed when pressing in the front panel.
– Do not hold fingers between the front panel and the
device when pressing.
Cleaning and maintenance
Operating instructions – 47/80