Faults; Cleaning; Cleaning The Surfaces - ergoline PASSION 300-S SUPER POWER Operating Instructions Manual

03/2012 1006324-02
5.2

Faults

Error codes are output to the display to simplify troubleshooting:
If a fault occurs, the error code flashes on the display.
If several errors occur, the error messages are displayed alternately.
Error elimination is acknowledged by pressing the START/STOP button.
If the error cannot be cleared, inform Customer Service - see page 2.
More detailed information regarding the error description and solutions is
available in 'Fehlercodes/Error Codes' (order no. 1011804-..).
5.3

Cleaning

DANGER!
Infections can be spread by skin contact!
All objects/device parts, which can come into contact with
the user during tanning, must be disinfected after every
tanning session:
– Acrylic glass panel
– Handles and control panel
– Protective goggles
– MP3 cable
– Adjustable air jets
NOTE:
Adhere to the stipulated times to ensure thorough disinfec-
tion. Follow the manufacturer's instructions for use.
5.3.1

Cleaning the surfaces

Acrylic glass surfaces
WARNING!
Do not rub with a dry cloth – danger of scratching!
Failure to comply voids any warranty claims.
– For the fast, hygienic and proper cleaning of acrylic
glass surfaces, use specially developed cleaning
agents.
– Concentrated disinfectants or solvents (e.g. Lysoform,
ethyl alcohol or other fluids containing alcohol) must
never be used for cleaning.
Cleaning and maintenance
Operating instructions – 39/80