Removing The Acrylic Glass Panel - ergoline PASSION 300-S SUPER POWER Operating Instructions Manual

03/2012 1006324-02
– Use the cushion as scratch prevention when opening the canopy panel.
5.7.2

Removing the acrylic glass panel

– Remove the screws and remove the washers.
– Push the bed to the rear with one hand and pull it out of the front guide
with the suction cup.
– Remove the acrylic glass panel and carefully lay it aside.
The assembly is the same process in reverse order.
When assembling the device please note:
– Carefully lay the acrylic glass panel in the guide.
– Remove fingerprints and other soiling carefully.
Cleaning and maintenance
Operating instructions – 45/80