Cleaning Or Replacing Canopy Effect Lighting; Cleaning The Base Filter - ergoline PASSION 300-S SUPER POWER Operating Instructions Manual

Cleaning and maintenance
54/80
– Use the scratch protection.
– Carefully lay the canopy panel in the guide.
5.12 Cleaning or replacing canopy effect
lighting
– Remove the screws.
Replace the lamps: see page 48.
Replace the starter: see page 49.
The assembly is the same process in reverse order.
5.13

Cleaning the base filter

– Remove the front panel: see page 47.
– Pull out the two outside filters to the front. Remove the middle filter via
the top.