Maintenance - ergoline PASSION 300-S SUPER POWER Operating Instructions Manual

03/2012 1006324-02
Component Interval
1 Handle X
3 Control panel X
4 Acrylic glass X
panel
5 Adjustable air X
nozzles
Protective X
goggles
MP3 cable X
6 Air jets
7–8 Surfaces
11 Condensate
container
2 Filter
9 Filter
10 Filter
NOTE:
Cleaning must be confirmed after each tanning session by
pressing the START/STOP button (when the warm-down
time for the main fan has finished).
5.5

Maintenance

Maintenance and care play a major role in deciding whether the device meets
the requirements placed on it in a satisfactory manner. Compliance with the
specified maintenance intervals and the careful conducting of the mainte-
nance and care work are therefore absolutely necessary.
The current operating hours of maintenance parts can be called up in service
mode (see 'Voreinstellungen/Presettings', order no. 1011777-..).
We point out that the device must be subjected to regular inspections by our
customer service or an approved specialized company every 12 months (from
commissioning) to maintain its proper condition!
Inspections and maintenance work that has been carried out must be entered
in the equipment, operating and maintenance booklet (order no. 1010363-..).
Cleaning and maintenance
Activity
Cleaning and disinfection
Cleaning and disinfection
Cleaning and disinfection
Cleaning and disinfection
Cleaning and disinfection
Cleaning and disinfection
X Clean
X Clean
X Empty
X Remove and clean filter
X Remove and clean filter
X Remove and clean filter
Operating instructions – 41/80
See
page
39
39
39
39
39
39
39
39
56
54
56
56