Table of Contents
Advertisement
Procedures
1.
Connect the power adapter to AC socket. See arrow ①.
2.
Plug the power adapter into the rear jack of the charger. See arrow ②.
3.
Place the radio with the battery attached, or the battery alone, into the charger.
4.
The charging process begins when the charger LED glows red. When charging is complete, the
charger LED glows green.
Note: To achieve optimal battery performance, please charge the battery for 5 hours before initial
use.
LED Indicator
Caution: Be sure to read the Safety Information Booklet, to get necessary safety information.
Assembling Accessories
Assembling the Antenna
Turn the antenna clockwise to fasten it.
To remove the antenna, rotate it counter-clockwise.
Assembling the Battery
Align the battery with the guide rails on the radio, and slide it in the direction as indicated by
1.
LED Indicator
Red LED flashes slowly.
Red LED glows.
Orange LED glows.
Green LED glows.
Red LED flashes rapidly.
Charger Status
Standby (no load)
Charging
90% charged
Fully charged
Failure
○
2 .
14
Advertisement
Table of Contents
