All Call; Calls On Analog Channels; Phone - Hytera PD79X Ex Manual

Call number in the home screen, and then hold down the PTT key to transmit the Group Call.
However, if the DTMF keypad is enabled, the number entered in the home screen is a phone
number. You can dial the Group Call number through the menu "Manual Dial" only.
Receiving and Responding to a Group Call
When a Group Call is received, your radio will display the icon
You may hold down the PTT key within the preset time period to call back.

All Call

Transmitting an All Call
Two methods are available for transmitting an All Call: transmitting a call to the preset contact;
transmitting a call through Contact List. They are the same as those in Transmitting a Group Call. When
transmitting an All Call, the icon
Note: You can transmit an All Call only when it is enabled by your dealer.
Receiving an All Call
When an All Call is received, your radio will display the icon
Note: You cannot respond to an All Call.

Calls on Analog Channels

To transmit a call, press and hold down the PTT key, and speak into the microphone. To receive, release
the PTT key.

Phone

If the repeater is connected with a PSTN gateway (such as Zetron M30), the radio can communicate with
the phone via it.
Operation:
Transmitting a phone call:
Enter the DTMF keypad mode. The following methods are available to enter this mode.
1.
Go to "Menu -> Phone – Manual Dial" to enter the DTMF keypad mode.
will appear.
.
.
23