Table of Contents
Advertisement
Open the battery latch and hold it down until the metal lock goes into the battery housing completely.
2.
Push the battery until it is fully fitted into the slot, and then release the battery latch.
3.
To remove the battery, please power off the radio first. Then open the battery latch, and slide the battery
out while holding down the battery latch.
Assembling the Belt Clip
1. Remove the screws.
2. Align the screw holes on the belt clip with those on the radio's body, and then tighten the screws.
To remove the belt clip, loosen the screws.
Assembling the Audio Accessory/Programming Cable
1. Open the accessory jack cover as the arrow shown.
2. Align the plug with the accessory jack.
3. Tighten the screw on the plug.
15
Advertisement
Table of Contents
