Table of Contents
Advertisement
2. Long press the programmed Emergency key.
3. Hold down the PTT key. The radio will transmit on the channel on which the radio operates before
entering the Emergency mode. (HDC1200)
Alarm with Call (None & HDC1200)
Operation:
1.
Press the programmed Emergency key to send alarm information. The radio displays the icon
and text information "Sending Alarm", with red LED glowing. (None: If "Local Emergency Alarm" is
enabled via the programming software, an alarm tone will sound.)
2.
When the icon
3.
When the icon
appears.
4.
If the preset Voice Cycles expire, you can hold down the PTT key to make the emergency call again
(the radio displays the icon
release the PTT key to receive (the radio displays the icon
And when a call is received, the icon
Two methods are available for you to exit the Emergency mode:
1. After the preset Alarm Cycles and Voice Cycles expire, the radio will exit the Emergency mode
automatically. (None)
2. Long press the programmed Emergency key.
Call Only (HDC1200)
Operation:
1. Press the programmed Emergency key to go to the Revert Channel, and the radio displays the icon
.
2. If
the Alarm with Call to Follow feature
emergency call when the radio displays the icon
3. When the icon
appears, you can speak into the microphone to make an emergency call.
appears, you can receive. And when a call is received, the icon
, with red LED glowing). After the emergency call is transmitted,
is enabled, you can speak into the microphone to make an
appears, you can receive. And when a call is received, the icon
, with LED flashing orange rapidly).
appears. (HDC1200 only)
.
39
Advertisement
Table of Contents
