Table of Contents
Advertisement
appears.
4. If the preset Voice Cycles expire, you can hold down the PTT key to make the emergency call again
(the radio displays the icon
release the PTT key to receive (the radio displays the icon
And when a call is received, the icon
To exit the Emergency mode, long press the programmed Emergency key.
Note: Your dealer may set the number of alarm cycles and alarm duration (None), number of
polite retries and impolite retries (HDC1200), number of voice cycles, duration of each transmission and
TX interval.
Operation Method for Digital Emergency
Alarm
Operation: Press the programmed Emergency key to send alarm information. The radio displays icon
and text information "Sending Alarm", with red LED glowing.
Two methods are available for you to exit the Emergency mode:
1. Once the Alarm Cycles expire, the radio will exit the Emergency mode automatically.
2. Long press the programmed Emergency key.
Alarm with Call
Operation:
1.
Press the programmed Emergency key to send alarm information. The radio displays icon
and text information "Sending Alarm", with red LED glowing.
2.
When the icon
3.
When the icon
appears.
4.
If the preset Voice Cycles expire, you can hold down the PTT key to make the emergency call again
(the radio displays the icon
release the PTT key to receive (the radio displays the icon
, with red LED glowing). After the emergency call is transmitted,
appears, you can speak into the microphone to make an emergency call.
appears, you can receive. And when a call is received, the icon
, with red LED glowing). After the emergency call is transmitted,
, with LED flashing orange rapidly).
appears.
, with LED flashing orange rapidly).
40
Advertisement
Table of Contents
