Basic Operations; Turning The Radio On/Off; Adjusting The Volume; Selecting A Zone - Hytera PD79X Ex Manual

Portable two-way radio

Table of Contents

Basic Operations

Rotate the Radio On-Off/Volume Control knob clockwise/counter-clockwise until a click is heard to turn

the radio on/off .

After turning the radio on, rotate the Radio On-Off/Volume Control knob clockwise to increase the call

volume, or counter-clockwise to decrease it.

A zone is a group of channels exhibiting the same property, and is programmed by your dealer. The radio

supports up to 64 zones, each with a maximum of 16 channels. You may select a zone through any of the

following methods:

1. Through menu selection

Go to the menu "Zone", and use the Up/Down key to select your desired zone.

2. Through the function keys

You may quickly toggle to your desired zone by pressing the programmed Zone Up or Zone Down key.

After turning the radio on, rotate the Channel Selector knob to select a desired channel.

If you enable the

Channel Notify feature via "Menu -> Settings -> Radio Set -> Tone ->Channel Notify", your radio will

broadcast the channel number. The channel notifying language (only Chinese and English are available

currently) is preset by your dealer.

Each channel can be programmed as either analog channel or digital channel. If the current zone

includes both analog and digital channels, you may quickly switch between digital and analog through the

Channel Selector knob.

Table of Contents