Lone Worker - Hytera PD79X Ex Manual

And when a call is received, the icon
To exit the Emergency mode, long press the programmed Emergency key.
Call Only
Operation:
1. Press the programmed Emergency key to go to the Revert Channel, and the radio displays the icon
.
2. If the Alarm with Call to Follow feature
emergency call when the radio displays the icon
3. When the icon
appears.
4. If the preset Voice Cycles expire, you can hold down the PTT key to make the emergency call again
(the radio displays the icon
release the PTT key to receive (the radio displays the icon
And when a call is received, the icon
To exit the Emergency mode, long press the programmed Emergency key.
Note: Your dealer may set the number of polite retries and impolite retries, number of voice cycles,
duration of each transmission and TX interval.

Lone Worker

This feature is ideal for persons who work lonely. If you encounter an incident and cannot operate your
radio within the preset time period, your radio will alarm automatically to summon help from your
companion.
Operation:
1. To enable the feature,
Go to "Menu -> Settings -> Radio Set-> Lone Worker" and select "Enable"; or
Press the programmed Lone Worker key (a high-pitched tone sounds); or
is enabled, you can speak into the microphone to make an
appears, you can receive. And when a call is received, the icon
, with red LED glowing). After the emergency call is transmitted,
appears.
.
, with LED flashing orange rapidly).
appears.
41